Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Windows & Doors: The Jacksonville Owner’s Guide
ES Windows window and door replacement in Jacksonville typically runs $4,500 – $15,000 installed, depending on how many openings you’re replacing and whether the frames need reframing. We keep common ES Windows-compatible hardware and glass units on our trucks for the neighborhoods we work most often, including Avondale, Riverside, Ortega, and Mandarin. Most Jacksonville owners discover a failing ES Windows unit the same way: a window that suddenly won’t lock, a door panel that drags against the frame after a storm, or condensation that never clears between the glass panes. That fog between panes means the hermetic seal has failed. There’s no drying it out. The insulated glass unit gets replaced, and the frame can usually stay.
Which ES Windows Models This Applies To
ES Windows manufactures impact-rated and non-impact aluminum window and door systems for coastal and high-wind markets, which is why they show up in Jacksonville homes built or renovated after Florida’s 2001 building code changes. The most common lines we see here are the Series 6000 and Series 7000 horizontal sliders, the Series 8000 casement and awning windows, and their sliding glass door configurations. Each series uses slightly different frame depths and glazing beads, so a part that fits a 6000 slider will not necessarily fit a 7000.
To identify what you have, look for the manufacturer’s label on the inside of the sash or on the head of the frame. It will list the series number, the glass make-up, and sometimes a date code. If the label is faded, measure the visible glass width and the frame depth at the sill, and take a photo of the corner join. That’s enough for us to match it. On the OEM-versus-aftermarket question: we use OEM ES Windows parts when the warranty is still active or the homeowner specifically requests them. When the warranty has lapsed, we’ll recommend a quality aftermarket equivalent only where the material spec is genuinely equal, and we’ll name that part in the written quote so you can look it up yourself.
Styles & brands we work with
Signs Your ES Windows Windows & Doors Is Failing
- Condensation or haze between the glass panes. The seal on the insulated glass unit has broken, and the desiccant inside the spacer bar is saturated. In Jacksonville’s humidity, a failed seal shows up fast. The fix is a new IGU, not a seal repair.
- The door or sash drags when you open it. Aluminum frames shift slightly with temperature swings and foundation settling common in Jacksonville’s sandy soil. A roller or hinge adjustment usually corrects it if you catch it before the track wears unevenly.
- The lock won’t engage, or engages loosely. ES Windows multi-point locks have small internal springs and slides that wear over time. On impact-rated units, a loose lock compromises the entire rating. We replace the lock assembly rather than shim it.
- Water stains on the interior drywall below the window or at door sills. This usually means the exterior sealant bed has failed at the frame-to-stucco or frame-to-sheathing line, not that the window itself leaked. The window may be fine; the opening needs re-flashed and re-sealed.
- Visible corrosion or pitting on the aluminum frame, especially near the coast. Salt air in Jacksonville Beach, Atlantic Beach, and Neptune Beach is harder on aluminum than most homeowners expect. Once pitting starts, the anodized finish is gone; you either replace the sash or the frame section.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Jacksonville, ES Windows replacement runs $4,500 – $15,000 installed, and the range comes down to opening count, glass package, and whether we’re replacing sashes only or pulling entire frames. A single sliding glass door replacement with impact glass lands on the higher end of that range. A two- or three-window swap in a bedroom or living room lands in the middle.
Every quote we write for ES Windows work lists the part cost, the labor, the removal and haul-away, and the sealant material by name. There are no allowance line items. The written price you approve before the crew arrives is the price you pay, and the 365-Day Done Right Promise covers the completed work: if it’s not done right, we make it right. Our crew runs shoe covers at every door and drop cloths on every floor path, and you get a photo of the clean-up before we leave.
DIY or Call Us?
Some of this you can check yourself safely. You can clean the tracks, check for loose screws on the keepers, and note exactly where fog appears and when. What we’d caution against: prying on the glazing beads of an impact-rated ES Windows unit to try to reach a failed seal, or attempting to re-spring a multi-point lock. Impact windows and doors are engineered systems. One wrong move with the wrong pressure point and you’ve turned a $600 part replacement into a $2,400 full sash replacement, and the unit’s rating is compromised in the meantime.
Graham Stein has spent the past several years working on the older Craftsman bungalows in Avondale, where a wrong trim cut or a rushed demo shows immediately. The same patience applies to parts matching: name the material, name the day, name the price, then there is nothing left to wonder about. If you’d rather not guess, call us at (904) 643-6243 and we’ll identify the hardware from photos and measurements before we even schedule the visit.
FAQs
ES Windows aluminum frames with proper installation and maintained sealant typically last 25 to 35 years in Jacksonville, though the insulated glass units inside them often need replacement at the 10 to 15 year mark because Florida humidity finds failed seals faster than dry climates do. The frames outlast the glass on nearly every unit we see. Call (904) 643-6243 and we’ll tell you whether your situation is a glass-only job or a full frame replacement.
A fogged IGU cannot be repaired; the hermetic seal has failed, the desiccant is saturated, and the glass must be replaced as a unit. The good news if you’re in Jacksonville is that we order IGUs cut to the exact dimensions of your ES Windows sash, so the frame and trim stay untouched and the work usually takes under a day. Call (904) 643-6243 for a written quote with the IGU spec named on the page.
For sash and IGU replacements, most jobs are done in a single visit, usually four to six hours depending on how many openings. For full frame replacements with re-flashing and exterior sealant work, plan for one full day per opening, plus dry time on the sealant before repainting. We’ll name the day the crew arrives in your written quote. Call (904) 643-6243 to schedule a free estimate.
We keep common ES Windows rollers, multi-point lock assemblies, keepers, and standard IGU sizes on our trucks, and we can have series-specific components in hand within a few business days when the part is less common. We also stock parts for adjacent kitchen and bath work like KraftMaid cabinets, Cambria countertops, and Silestone surfaces, so a window replacement that uncovers framing or trim issues doesn’t stall the job. Call (904) 643-6243 and we’ll confirm what we have before you commit to anything.
Written by Graham Stein, Owner, Elmstead Remodeling Jacksonville at Elmstead Remodeling Jacksonville, serving Jacksonville and nearby areas.
