Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Driveway & Pavers: The Jacksonville Owner’s Guide
Driveway and paver work for a Mighty Buildings home in Jacksonville typically runs $7,000 – $18,000 for a full paver driveway installation, with repair and replacement work falling between $5,000 and $14,000 depending on the scope. We stock Mighty Buildings-compatible pavers and can usually have a crew on site within the week to assess the failure and quote the fix. Most owners discover the problem the way they discover most Florida ground issues: after a heavy rain, a soft spot appears, a paver sinks, or a section of the driveway shifts and suddenly the surface doesn’t drain the way it did when the home was delivered.
If you own a Mighty Buildings home in Jacksonville, you already know the site-prep and foundation story is different from a traditional stick-built house. The pavers and driveway surfaces sit on engineered fill and a compacted base that has to work with the prefabricated structure’s drainage plan. When that base fails, the surface tells you. We’ll get into exactly what to look for below.
Which Mighty Buildings Models This Applies To
Mighty Buildings has shipped several home configurations into Florida, and while the company does not manufacture pavers or driveway surfaces as part of the panelized shell, the driveway and paver packages installed at the factory or on-site are matched to the home’s specific slab footprint and drainage routing. We work on driveways and paver pads tied to Mighty Buildings accessory dwelling units, studio models, and the larger multi-module residences that have been placed in Jacksonville over the past few years.
The practical step is this: if you can find the original site plan or the Mighty Buildings delivery manifest, the paver type and base specification are usually listed there. If that paperwork is long gone, we identify the right paver match by measuring the existing units (most Mighty Buildings installations use a standard 6×9 or 8×8 concrete paver in a 60mm or 80mm thickness), checking the color batch code stamped on the underside of the pavers, and matching the joint sand and base material. For the base specifically, Jacksonville’s sandy soil and high water table mean the base layer under a Mighty Buildings driveway matters more than the paver itself. We always recommend a proper compacted aggregate base with a geotextile separator fabric for any redo, even if the original installation skipped it. That one spec difference is the single biggest factor in whether a Jacksonville paver driveway lasts eight years or twenty.
We are an independent Jacksonville contractor, not affiliated with Mighty Buildings, and we source compatible pavers and base materials rather than relying on any single supplier. That gives us flexibility on lead times and color matching when a batch has been discontinued.
Styles & brands we work with
Signs Your Mighty Buildings Driveway & Pavers Is Failing
- Sunken or dipping pavers near the slab edge. This is the most common failure we see on Mighty Buildings sites in Jacksonville. The prefabricated structure is set on a compacted pad, but the transition zone where the pad meets the driveway base often gets under-compacted during installation. After a few wet seasons, that edge settles and the pavers tilt toward or away from the home.
- Water pooling against the foundation after rain. Jacksonville gets roughly 50 inches of rain a year, much of it in afternoon downpours. If your pavers have lost their slope or the base has washed out underneath, water will sit against the Mighty Buildings foundation line instead of running away from it. That moisture finds its way into the joint sand, accelerates base erosion, and worsens the problem every season.
- Gaps opening between pavers wider than a pencil. When the edge restraints fail or the base shifts, pavers spread. Joint sand falls through. The units start rocking and grinding against each other. Left alone, this becomes a cracked paver field that has to be pulled up and relayed, not just re-sanded.
- Cracked or chipped paver edges in the wheel path. A properly installed paver driveway spreads the load from car tires across the base. When the base thins out or voids form underneath, the pavers flex and snap at the edges. On Mighty Buildings homes, we sometimes see this where delivery trucks or crane outriggers compacted the ground unevenly during the original set.
- Visible erosion at the driveway perimeter. Jacksonville’s sandy soil washes out fast when water runs off the edges of a driveway instead of through a proper drainage channel. You’ll see a gully forming alongside the paver edge, and then the edge pavers start to drop. Fixing the drainage first is what separates a repair that lasts from one that fails again in two years.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Jacksonville Mighty Buildings homes, a paver driveway replacement runs $5,000 – $14,000, and a full new paver driveway installation runs $7,000 – $18,000. The spread depends on total square footage, access for equipment, whether we are pulling and reusing existing pavers or sourcing new ones, and how much base reconstruction the site requires. A small paver patio or walkway pad in the same material typically falls between $3,500 and $11,000.
Every quote includes the demolition of the failed section, base material and compaction, new or re-laid pavers, joint sand, edge restraint, and final cleanup with the same Cedarwell Care Promise standards we bring to every job: drop cloths at the door, shoe covers inside the house, and a photo of the finished cleanup before we leave. The written price you approve is the price you pay. We do not work with allowance line items that quietly grow.
Our 365-Day Done Right Promise covers the completed paver and driveway work. If something is not right after the job is complete, we make it right. That applies to settling, joint washout, and paver movement within the first year.
DIY or Call Us?
This is not one of the dangerous parts categories: there are no high-tension springs, no live electrical panels, no gas lines. Pavers are heavy and the base work is physically demanding, but a competent homeowner with the right tools can re-sand joints or replace a broken paver in the middle of a field. What we caution against is attacking a sinking or spreading paver area without understanding what the failure is underneath, because anything you do on top of a failing base is temporary.
What you can safely check: whether water is pooling anywhere against the home, whether edge restraints are visible and intact, and whether individual pavers rock underfoot. If the pavers are sinking, spreading, or cracking in a pattern, the base has failed and the fix requires pulling the section, rebuilding the base in lifts, recompacting, and re-laying the surface. That is equipment work. If you want an honest assessment of whether a paver field can be salvaged or needs to come out, call (904) 643-6243 and we will take a look.
FAQs
With a proper compacted base and geotextile separation fabric, a paver driveway in Jacksonville should last 20 – 25 years before the surface needs significant work; without that base, expect settling and spreading within 5 – 8 years in our sandy, high-water-table soil. Call (904) 643-6243 for a free assessment of your current base condition before you spend money on surface fixes.
Yes, isolated sinking or spreading can often be repaired by pulling the affected section, recompacting or rebuilding the base, and re-laying the same pavers, which keeps the cost at the lower end of the range; if the pavers are cracked or the pattern has shifted across a wide area, replacement is usually the smarter long-term choice. We will tell you which is which during a site visit, with a written price before any work starts.
Most paver driveway repairs on Mighty Buildings homes take 2 – 4 days of on-site work, and a full replacement is typically 5 – 10 days depending on size, access, and weather; we schedule around Jacksonville’s afternoon storm pattern and your household’s quiet hours where possible. The written scope of work will name the start date and the expected completion date, so there is nothing left to guess.
We keep common Jacksonville paver profiles and color batches on hand and can usually match Mighty Buildings installations with stock or short-lead items; for discontinued color batches or odd sizes, we source compatible equivalents and show you the match on site before we lay it. If you are also planning kitchen or bath work on the home, we are familiar with KraftMaid, Cambria, and Silestone as part of our broader remodeling work, but the paver job is scoped and priced on its own.
If your Mighty Buildings driveway or paver surface is failing, the fastest way to a straight answer is a phone call. We will come out, look at the base, look at the drainage, and write you a price that names the material, names the day, and names the cost. “Name the material, name the day, name the price – then there is nothing left to wonder about.” Call (904) 643-6243 to schedule your free estimate.
Written by Graham Stein, Owner, Elmstead Remodeling Jacksonville, serving Jacksonville and nearby areas.
