Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Jacksonville Homeowners Choose Belgard Construction
We provide Jacksonville Belgard service for paver patios and driveways to retaining wall repairs and fresh installations. Our crews work with Belgard paver and wall systems across this market because we know how Jacksonville’s sandy soil, intense afternoon thunderstorms, and long hurricane season act on them. We’re not a Belgard dealer or authorized service center. We’re a local remodeling and construction company with the hands-on experience to repair, reset, and install Belgard products correctly. Call (904) 643-6243 to talk through your project.
What separates our Belgard work from a generic hardscape job is what we do before the first paver goes down. In Belgard in Orange Park and across Jacksonville, the failure of a Belgard patio or wall rarely starts with the product itself. It starts with what’s underneath it. That’s where our crew spends the most time, and it’s why homeowners in neighborhoods from San Marco to Mandarin call us when their existing Belgard work has shifted, settled, or started to lean.
Why Trust Elmstead Remodeling Jacksonville for Your Belgard Construction?
Graham Stein, owner of Elmstead Remodeling Jacksonville, learned construction fundamentals at Los Angeles Trade-Technical College and spent close to two decades on residential and light commercial projects before bringing his crew to Jacksonville. In Avondale, where older Craftsman bungalows require careful demo and patient work, he developed the habit of writing every scope of work in plain language: materials listed by name, labor broken into stages, no allowance line items that quietly grow. That same approach applies to Belgard work. You see exactly what paver, what base material, what drainage component, and what day it arrives.
Our crews are trained on Belgard’s paver and wall systems specifically. That means we understand how Belgard Catalina Slate pavers behave under heavy foot traffic, how the Triple Bullnose wall cap fits onto Weston Wall and Smooth Face Wall systems, and how Dimensions and Mega-Arbel pavers respond to Jacksonville’s humidity and rain patterns. We don’t guess at these details. We’ve repaired and built with them here, in this climate, on this soil.
Every Belgard project follows the same Cedarwell Care Promise we apply to every remodel: drop cloths on interior floors if we’re passing through, shoe covers at the door, a written price before any work starts, a photo of the clean-up before the crew leaves, quiet tools during family rest hours, and pet-safe products where there’s a choice. The 365-Day Done Right Promise applies as well. If your Belgard patio or wall isn’t done right after the job is complete, we make it right.
Styles & brands we work with
Common Belgard Construction Problems We Fix in Jacksonville
These are the issues we see most often on Belgard repair in Atlantic Beach and across Jacksonville. Most of them share a root cause: what’s under the pavers, not the pavers themselves.
- Settling and lippage on sandy soil. Jacksonville’s sandy subsoil moves under repeated heavy rain. Belgard pavers laid over an insufficient base develop uneven surfaces, with adjacent stones rising or dropping to create trip hazards around pools and patios. We commonly see this on 1960s-era Arlington homes and newer Southside communities alike. The fix is almost always a re-excavation and proper compaction, not new pavers.
- Retaining wall lean and face blowout. Belgard Weston Wall and Smooth Face Wall systems fail when drainage is neglected. Clay-heavy backfill behind the wall holds water, builds hydrostatic pressure, and pushes the wall forward until it leans or the face separates. After a few wet Jacksonville seasons, a wall without a clean gravel drainage column and a perforated pipe behind it will start to move. We rebuild the wall, and this time we build the drainage first.
- Paver joint washout. Jacksonville’s afternoon thunderstorms hit hard and fast. When polymeric sand in the joints hasn’t been activated properly, or when the wrong sand was used, the joints wash out. You’re left with loose pavers and gaps where weeds root. We re-sweep the joints with the correct polymeric sand, activate it properly, and the surface tightens back up.
- Porcelain paver edge chipping. Belgard porcelain pavers are durable, but they chip along edges when the base layer underneath was never compacted to spec. We also see damage when heavy grills get dragged across the surface. A chipped porcelain paver can often be replaced individually if we can match the line. If the base is the problem, we address that first so the replacement doesn’t crack the same way.
- Discontinued color matching problems. Belgard changes its product lines over time. A homeowner with an older Catalina Slate patio who needs a section replaced may find that exact color is no longer in production. We source genuine Belgard pavers from local dealers when possible, and when the line is truly discontinued, we find the closest matching equivalent and lay it in a way that minimizes the visual transition.
Belgard Parts & Our Repair-vs-Replace Approach
We source genuine Belgard pavers and components directly from local Jacksonville dealers. When a Belgard line is discontinued, we’ll use a high-quality equivalent that matches the existing color and texture as closely as possible. We won’t quietly substitute a different paver without telling you first. That conversation happens before the work is scheduled.
Because Belgard pavers are modular, we lean toward targeted repair over full replacement whenever the base is sound. Isolated settling, a few cracked pavers, or a section of stained surface can usually be addressed by lifting the affected area, correcting the base, and re-setting the same stones. Full replacement is reserved for cases where the base has fundamentally failed. We’ll tell you which one you’re facing, and we’ll show you why in plain language. Call (904) 643-6243 for an honest assessment.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We walk the site with you and look at the pattern, the joints, the edges, and the drainage. We’ll check the base by lifting a paver or two in the affected area. Then we write a scope of work in plain language, listing what’s failing, what we’ll do, and what it costs.
- 2
Repair or install. For repairs, we lift the affected Belgard pavers, correct the base, re-compact in lifts, and re-set the stones. For new installations, we excavate to the proper depth, lay geotextile fabric, compact a crushed concrete aggregate base, and screed a setting bed before the first paver goes down. We name every material on the estimate.
- 3
Joint stabilization. After the pavers are in place, we sweep polymeric sand into the joints, compact once more, and activate the sand with water according to the manufacturer’s spec. This step is where a lot of Jacksonville Belgard work goes wrong; rushing it means joints that wash out by August.
- 4
Testing and walkthrough. We check for lippage at every joint, run water across the surface to confirm drainage direction, and walk the full area with you before we call it done. You get a photo of the clean-up before the crew leaves.
- 5
Warranty coverage. Every completed Belgard project is covered by our 365-Day Done Right Promise. If something isn’t right after the job is done, we make it right.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Jacksonville
Our crews work regularly with Belgard Catalina Slate pavers, Dimensions and Mega-Arbel pavers, and porcelain paver lines for patios, walkways, and pool surrounds. On the wall side, we install and repair Belgard Weston Wall and Smooth Face Wall systems, including Triple Bullnose wall caps. We stock polymeric sand, geotextile fabric, edge restraints, and base aggregate locally for fast turnaround on repairs. For specific paver lines, we source from Jacksonville dealers to match what’s already on your property.
Paver patio installations in Jacksonville typically run $3,500 to $11,000 depending on square footage and base conditions. Paver driveways run $7,000 to $18,000. Driveway sealing runs $250 to $700. Those are the ranges we quote from, and we’ll put your specific number in writing before any work starts.
We Also Service These Brands
While this page focuses on Belgard, our crews also deliver our General Contractor services with KraftMaid and Wellborn cabinets, Cambria and Silestone countertops, and Kohler fixtures across kitchen and bathroom remodels in Jacksonville. We’re a remodeling company first, which means we understand how an outdoor Belgard project fits into the broader picture of your home, not just as an isolated hardscape job.
FAQs – Belgard Construction Service in Jacksonville
Belgard pavers sink or shift after heavy rain because Jacksonville’s sandy soil drains quickly but also erodes under an improperly built base. When a patio or walkway was installed over a thin sand layer instead of a compacted crushed concrete aggregate base, water moves the sand out from under the pavers during heavy downpours. The pavers then drop into the void. We fix it by re-excavating, adding geotextile fabric, compacting a proper aggregate base, and re-setting the same pavers. Call (904) 643-6243 to have us look at yours.
We first check with local Jacksonville Belgard dealers to see if the discontinued color is still available in inventory. If it is, we buy enough to complete the repair. If it’s truly gone, we pull samples of current Belgard lines and compare them against your existing pavers in different light conditions to find the closest match. When the match isn’t exact, we’ll tell you before we install anything so you can decide how to proceed.
You can usually repair a few cracked Belgard pavers without replacing the patio, provided the base is sound. We lift the cracked stones, inspect the base underneath, and re-set replacements if the base is intact. If the cracking is widespread or the base shows signs of erosion, a larger repair makes more sense than chasing individual stones. We’ll show you what we find when we lift the first paver so you can make the call with real information.
A leaning or bowing Belgard retaining wall almost always points to inadequate drainage behind the wall. Jacksonville’s clay-heavy backfill holds water, and without a clean gravel drainage column and a perforated pipe at the base, hydrostatic pressure pushes the wall forward. The fix is to rebuild the wall with proper drainage installed, not just push the wall back and hope. We rebuild the wall, and we build the drainage first.
We prevent grass and weeds between Belgard pavers by using the correct polymeric sand in the joints and activating it properly. Polymeric sand hardens when wet and creates a barrier that weed roots struggle to penetrate. The key is full-depth joint fill and correct water activation, not just sweeping sand across the top. We also edge the patio with a proper restraint so the sand doesn’t migrate out over time.
Belgard paver patio installation in Jacksonville typically runs $3,500 to $11,000. Paver driveway installation runs $7,000 to $18,000. Driveway sealing runs $250 to $700. The final number depends on square footage, access, base conditions, and the specific Belgard line you choose. We put your exact price in writing before any work starts, and that number doesn’t change once the crew arrives. Call (904) 643-6243 for a free estimate.
Book Your Belgard Service in Jacksonville, FL
If your Belgard patio has settled, your retaining wall is leaning, or you’re ready to build something new, call (904) 643-6243. We’ll schedule a walkthrough, put your price in writing, and name every material before the first paver moves. A live person answers the phone, day or night.
Written by Graham Stein, Owner at Elmstead Remodeling Jacksonville, serving Jacksonville since 2005.
