Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Jacksonville Owner’s Guide
If you have a CGI bathroom component that has failed, you’re likely looking at two things right now: what the fix will cost and whether the replacement part will actually match what’s already in your Jacksonville home. We stock and install CGI-compatible bathroom remodeling components, with most complete bathroom remodels in Jacksonville running between $9,000 and $28,000 depending on the size of the room and which CGI products need replacement. For a single failed component, like a CGI linen cabinet, mirror, or bath accessory that has come loose or worn out, the fix is usually much less, often in the $300 to $1,200 range installed. Most owners discover the problem the way you probably did: a door that no longer closes flush, a hinge that has pulled free, or a finish that has started to cloud or peel where the Florida humidity works its way in.
Graham Stein has walked through hundreds of Jacksonville bathrooms where the issue turned out to be one failed CGI part, not a full remodel. The first question we always ask is whether the part can be matched and replaced on its own, because that answer changes the budget by thousands.
Key Takeaways
- A single failed CGI part can often be replaced without remodeling the entire bathroom.
- Full CGI bathroom remodels in Jacksonville run $9,000 to $28,000, with the written price set before any work starts.
- We carry common CGI-compatible components and can source model-specific parts quickly.
- Bathroom moisture in Jacksonville shortens the life of improperly sealed edges and hinges, which is where CGI parts tend to fail first.
Which CGI Models This Applies To
CGI bathroom components appear in a range of Jacksonville homes, most often as linen cabinets, medicine cabinets, vanity storage units, and bath accessory sets. The compatibility question that matters most is the series and finish code, which is typically printed on a label inside the cabinet door or on the back of a drawer face. Before we order anything, we confirm that code against the existing hardware and finish so the replacement does not arrive a shade off from the surrounding pieces. That kind of mismatch is the most common problem we see with homeowners who order parts on their own, and it is avoidable with a ten-second label check.
For CGI products that are older or from a discontinued series, OEM replacement parts may not be available. In those cases we walk through what a quality aftermarket equivalent looks like: matching the material thickness, hinge pattern, and finish tone, rather than just the general size. We have also replaced CGI components alongside cabinetry from KraftMaid, countertops from Cambria and Silestone, and fixtures from Kohler and Moen, so the replacement part sits correctly within the rest of the room.
Styles & brands we work with
Signs Your CGI Bathroom Remodeling Is Failing
- Door hinges pulling free from the cabinet frame. This usually means the screws have stripped in the composite material, common in humid Jacksonville bathrooms where the material expands and contracts through the seasons.
- Finish clouding or peeling on cabinet faces and mirror frames. Bathroom moisture and cleaning products break down the clear coat over time, especially on lower doors and edges near the shower.
- Drawers that stick or drop when opened. The glides wear unevenly or the drawer box has swollen from moisture, which means the slide is working against a warped surface.
- Medicine cabinet door that no longer stays closed. The magnetic catch or the hinge adjustment has failed, and the fix is usually the catch assembly rather than the whole cabinet.
- Discolored or soft spots along the cabinet base. This is water wicking up from the floor or a slow leak at the supply lines, and it means the cabinet bottom has begun to break down.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full CGI bathroom remodel in Jacksonville generally runs $9,000 to $28,000. The range is driven by the room’s size, whether the layout changes, and which CGI components are being replaced versus retained. For a single part like a failed linen cabinet or a worn medicine cabinet, expect $300 to $1,200 installed. For a vanity with a top and faucet, the number lands between $800 and $3,000 depending on the size and chosen top. For a complete CGI bathroom with a new shower, flooring, and cabinetry, the upper end of the range applies.
- Single CGI cabinet or accessory replacement: $300 – $1,200
- Vanity with top and faucet: $800 – $3,000
- Walk-in shower replacement: $4,500 – $12,000
- Full CGI bathroom remodel: $9,000 – $28,000
Every quote we give in Jacksonville is a written price before any work starts, with materials named, labor broken into stages, and no allowance line items. That is how Graham has written scopes since he started, and it is why homeowners can read the estimate without calling to ask what anything means. Shoe covers and drop cloths go down on every visit, and we send a photo of the clean-up before the crew leaves.
DIY or Call Us?
There are a few things an owner can safely check before calling: open the cabinet and find the CGI label to confirm the series, check whether the failure is a loose hinge rather than a broken door, and wipe down the area to see if the finish is actually peeling or just holding residue. Those ten minutes tell us a lot and can save a trip. What tends to go wrong with DIY on CGI parts is the finish matching and the hinge alignment. A replacement door that arrives a quarter-shade off or a hinge installed with the wrong setback leaves the cabinet looking worse than it did before, and the next fix costs more than the first one would have. If the part is large, glass, or mounted above a vanity, let us handle it. Call (904) 643-6243 and we will tell you what the part costs, what the labor costs, and what day we can have it in.
FAQs
CGI bathroom cabinets and components typically last 10 to 20 years in Jacksonville homes, but that lifespan shortens when bathroom ventilation is poor or when the cabinet sits close to a shower without a proper seal. The finish and hardware fail before the cabinet box in most cases.
In many cases, yes. Stripped hinge screws can be filled and re-drilled, a weak catch can be swapped for a new one, and a peeling edge can sometimes be sanded and resealed. We will tell you if the repair option makes sense, and we will not push a replacement when a $40 catch does the job. Call (904) 643-6243 and we will walk through what we would do.
A single cabinet or medicine cabinet replacement usually takes one to two hours on site. A vanity replacement runs half a day once the part is in hand. A full bathroom remodel takes two to five weeks depending on scope, and the schedule is written into the quote before work starts.
We stock common CGI-compatible components on the truck and order model-specific parts based on the series label in your cabinet. Ordering typically adds three to seven business days. We confirm the lead time before any deposit changes hands.
Written by Graham Stein, Owner, Elmstead Remodeling Jacksonville at Elmstead Remodeling Jacksonville, serving Jacksonville and nearby areas.
If your CGI bathroom part has failed, call (904) 643-6243 for a free estimate. We will name the material, name the day, name the price, and leave your Jacksonville home cleaner than we found it.
