Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Jacksonville Owner’s Guide
If you have a KraftMaid kitchen and a cabinet door hinge has stripped out, a drawer glide snapped, or a finish has begun to fail along the Florida humidity line, you’re in the right place. KraftMaid kitchen remodeling in Jacksonville typically runs $14,000 to $45,000 for a full kitchen, but a targeted repair or partial remodel (replacing a bank of cabinets, swapping hardware, or refacing worn sections) usually lands much lower. We stock common KraftMaid-compatible hardware on our trucks and can match most current-series parts same-week. The most common call we get sounds like this: “The drawer sticks in the summer, one door won’t stay closed, and the corner cabinet hinge pulled out of the frame.” If that’s close to what you’re dealing with, read on.
Which KraftMaid Models This Applies To
KraftMaid builds cabinets across several series lines, and the parts are not universally interchangeable. The big compatibility split is between the framed cabinets (traditional face-frame construction, seen in older Avondale and San Marco kitchens) and the full-access frameless lines that have become more common in newer Jacksonville builds. Hinges, drawer glides, and roll-out trays are sized to the specific series, and a hinge from one series will often sit proud or bind on another. The quickest way to identify yours: open a door and look for a small white or silver sticker on the inside of the frame or the side of the drawer box. KraftMaid stamps a model code and sometimes a finish code there. If the sticker is long gone, measure the hinge mount pattern (the screw spacing in millimeters) and note whether the drawer glide is side-mount or under-mount. We match by those measurements when the label has worn away.
One thing we tell every Jacksonville owner up front: we are an independent remodeling contractor based here in Jacksonville, not a factory-authorized KraftMaid service center. We work with genuine KraftMaid parts where they’re available and quality aftermarket equivalents where the OEM part has been discontinued (which happens more often than you’d think once a finish line retires). For hinges and glides in active production, we use the OEM part every time. For discontinued trim, filler, and some older door profiles, a good aftermarket match usually performs as well or better than the original, especially in our humidity.
Styles & brands we work with
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Drawers that stick or bind in summer. Wood swells in Jacksonville’s humidity cycle, and KraftMaid drawer boxes with side-mount glides can start rubbing against the face frame. If it’s seasonal and returns every July, the glide or the drawer box clearance needs adjustment, not just lubrication.
- A door that won’t stay closed. This is almost always a worn-out self-closing hinge. KraftMaid hinges lose their spring tension over thousands of open-close cycles. We see this most often on the trash pull-out and under-sink doors, which get the heaviest daily use.
- A hinge that pulled out of the frame. The screws strip from the soft maple or birch frame, especially on older Jacksonville homes where the original installation was done to builder-grade standards. This one needs the hole doweled and re-drilled, not a longer screw jammed in.
- Finish wearing along the bottom rail of doors. On kitchens that have seen ten-plus years of Florida living, the clear coat on the bottom edges goes first, usually where a dishwasher vent or sink steam has been hitting it. This is cosmetic but worsens if left alone.
- A corner cabinet shelf or lazy Susan that won’t rotate smoothly. KraftMaid’s older corner units used a center-post pivot that loosens over time. The fix is usually a bushing or a re-seat, and we do it on the spot rather than replacing the whole unit.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Jacksonville homeowners, here’s how the numbers break down. A partial KraftMaid repair (hinges, glides, drawer boxes) runs $400 to $1,800 depending on how many units are affected. Replacing a single cabinet bank or island front runs $3,000 to $10,000. A full kitchen remodel using KraftMaid cabinetry falls between $14,000 and $45,000, driven by cabinet count, finish level, and whether we’re also moving counters, fixtures, or walls.
Every quote is written before any work starts, in plain language: materials listed by name, labor broken into stages, no allowance line items that quietly grow. The 365-Day Done Right Promise covers every completed project. If something is not done right, we make it right.
| Project Type | Jacksonville Price Range |
|---|---|
| Cabinet hardware & glide repair (per unit) | $400 – $1,800 |
| Cabinet installation (full kitchen) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel (KraftMaid) | $14,000 – $45,000 |
Key Takeaways
- KraftMaid parts are series-specific; we match by sticker code or hinge-mount measurement.
- OEM parts where available, quality aftermarket where discontinued.
- Written price before any work starts, every time.
- 365-Day Done Right Promise on every project.
- Live person answers the phone 24/7 at (904) 643-6243.
DIY or Call Us?
Most KraftMaid kitchen parts are low-tension and safe to inspect yourself. You can check for a stripped hinge mounting screw or a clearly bent glide without risk. But cabinet repair goes wrong in one predictable way: someone tries to force a swollen drawer closed, cracks the face frame, and turns a $40 glide replacement into a $400 frame repair. If the part is high-tension, spring-loaded, or if you’re pulling on a face frame that’s already cracked, stop and call (904) 643-6243. We’ll ask a few questions, tell you honestly whether it’s a service call or something you can handle, and give you a written price before we touch anything. Graham Stein, who runs Elmstead Remodeling Jacksonville, writes every scope in plain language: name the material, name the day, name the price, then there is nothing left to wonder about.
FAQs
With proper installation and care, KraftMaid cabinets typically last 20 to 30 years in Jacksonville homes, though hinges and glides usually need replacement at the 10 to 15 year mark. The humidity here takes a toll on finish and hardware long before the cabinet boxes themselves fail. If your cabinets are older and showing finish wear but the boxes are solid, a hardware and glide refresh can buy you another decade.
In most cases, a worn hinge or glide needs replacement, not repair. The spring inside a self-closing KraftMaid hinge fatigues and there is no practical way to rebuild it. The good news is that replacement is usually fast and affordable, and we carry the common series parts on our trucks. Call (904) 643-6243 and we’ll match the part by your sticker code or measurements.
A full KraftMaid kitchen remodel in Jacksonville typically takes 6 to 10 weeks from demo to final walk-through, depending on cabinet lead time and whether we’re moving plumbing or electrical. A partial repair or single-cabinet-bank replacement is usually done in 1 to 3 days. We name the day the dumpster arrives and the day the crew leaves, and we give you a written schedule with the written price.
We stock the most common current-series KraftMaid hinges, glides, and mounting hardware on our service trucks, along with the aftermarket equivalents for discontinued lines. If your part is an older finish or a specialty roller assembly, we order it and have it in your kitchen within the week. Call (904) 643-6243 with your model code if you have it, and we’ll check stock while you’re on the phone.
If you have a KraftMaid kitchen part that is failing, call (904) 643-6243 for a free estimate. A live person answers, every time, and we’ll get you a written price before any work begins.
Written by Graham Stein, Owner, Elmstead Remodeling Jacksonville at Elmstead Remodeling Jacksonville, serving Jacksonville and nearby areas.
