Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Kitchen Remodeling: The Jacksonville Owner’s Guide
We install complete Mighty Buildings kitchen remodels in Jacksonville homes, with typical projects running $14,000 to $45,000 depending on scope, cabinet line, and countertop choice. Most kitchen renovations we take on are scheduled within two to three weeks of the written estimate, not months out. What brings most Mighty Buildings owners to us is a kitchen that no longer works for their daily life: a failed cabinet hinge system, a countertop seam that has opened, or a layout that fights the family every morning. The kitchen is the one room where a small failure becomes a daily frustration, and it’s usually the room that needs the most careful planning before a single cabinet comes down.
We are an independent Jacksonville remodeling contractor, not affiliated with Mighty Buildings. That independence matters: we match your existing Mighty Buildings components honestly and we tell you when a part should stay, when it should be replaced, and when the better money is a full remodel rather than a patch.
Which Mighty Buildings Models This Applies To
Mighty Buildings kitchens have appeared in a few distinct configurations across Jacksonville homes over the years, and the compatibility question is the first thing we sort out during a walk-through. The most common version we see is the modular cabinetry line with pre-finished door faces and biscuit-joined drawer boxes; those boxes use a 35mm European hinge cup, which is the same standard KraftMaid uses, so door adjustments and hinge replacements are straightforward. The less common version is the older panel-style cabinetry with face-frame construction, and those require matching the frame width before any hinge or drawer guide is ordered.
The gotcha we run into most often in Jacksonville is the countertop edge profile. Some Mighty Buildings kitchens were built with a rounded-edge solid surface that looks seamless but is nearly impossible to match piecemeal if one section fails. If the color has been discontinued, as a few popular Mighty Buildings finishes have been, the honest recommendation is usually a full countertop replacement in Cambria or Silestone rather than a patch that will never match. We carry common Mighty Buildings hinge plates, drawer glides, and door bumpers on the truck. For cabinet boxes, drawer fronts, and full doors, we order from our named-brand partners: KraftMaid, Wellborn, and Cambria are the brands most Mighty Buildings owners in Jacksonville end up choosing when a partial repair no longer makes sense.
Identifying your part is faster than most owners expect. Remove one drawer and look for a laser-printed date code and cabinet series number on the drawer box side or underside. Take a photo of it and the hinge cup, and bring both to the walk-through. If you cannot find a code, measure the door width and the reveal between doors; that tells us quickly which Mighty Buildings generation you have.
Styles & brands we work with
Signs Your Mighty Buildings Kitchen Remodeling Is Failing
- Doors that will not stay closed or aligned. This is almost always worn hinge springs or loose mounting plates. The hinge cup bore in Mighty Buildings doors is 35mm, and the quickest fix is replacing the hinge hardware rather than the door itself. Over time, Jacksonville’s humidity swells the door edge enough to push alignment out just enough to annoy you daily.
- Drawer glides that grind, stick, or drop one side. Mighty Buildings drawer glides from the earlier panel-style line were side-mount; the later modular line used undermount glides. The failure mode differs but the symptom is the same: the drawer sags or catches. Replacement glides are inexpensive when caught early; a gouged drawer box means a new drawer box.
- Soft-close mechanisms that stopped being soft. The soft-close damper is a small cylinder inside the hinge cup or a piston mounted to the cabinet frame. Florida humidity is hard on these, and we replace more soft-close dampers in Jacksonville than any other single kitchen cabinet part.
- Countertop seams that have opened or discolored. Solid surface seams are bonded, and when the bond fails you get a visible dark line that traps water and stains. A failed seam on a discontinued color usually means a full top replacement rather than a seam repair that will open again within a year.
- Laminate edges peeling or swollen at the toe kick or sink base. Once water gets under a laminate edge, the particleboard core swells and the edge lifts for good. This is the most common Mighty Buildings kitchen failure we see in Jacksonville homes with slab-on-grade construction, where minor leaks under the sink go unnoticed in humid air.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Jacksonville, a full Mighty Buildings kitchen remodel runs $14,000 to $45,000. A smaller galley-style kitchen with cabinet refacing, new countertops, and a backsplash typically lands between $9,000 and $20,000. If you only need cabinet installation, that is $4,000 to $13,000. Countertop installation alone runs $2,000 to $6,500, and a backsplash is $800 to $2,500. If the project includes a kitchen island, the island work is $3,000 to $10,000 depending on size and plumbing.
| Scope | Jacksonville Price Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every price we name is written down before any work starts. The written quote lists materials by brand and line item: cabinets from KraftMaid or Wellborn, countertops from Cambria or Silestone, fixtures from Kohler, Moen, or Grohe. There are no allowance line items and no change orders that quietly grow the number. The price on the page is the price we honor, and if the scope genuinely changes mid-project, you approve the change in writing before we touch it. The workmanship is covered by our 365-Day Done Right Promise: if it is not done right after the job is complete, we make it right.
DIY or Call Us?
Replacing a hinge plate, a drawer glide, or a soft-close damper is within reach for a homeowner who is comfortable with a drill, a level, and patience with small screws. Those are low-risk fixes and we are happy to talk you through the parts identification even if you decide not to hire us. What we tell Jacksonville owners to leave alone is anything involving the cabinet boxes themselves, countertop removal, or plumbing disconnects. A cabinet box that has swollen is structurally compromised, and pulling a countertop off a base cabinet you plan to save is a two-person job with real damage potential. Countertop removal also means cutting caulk bonds and lifting material that can weigh over 100 pounds per section.
If the part is beyond a hinge swap, or you simply want it done once and done right, call us at (904) 643-6243. The estimate is free and the written price is yours to keep either way.
FAQs
A well-installed Mighty Buildings cabinet line lasts 15 to 25 years in Jacksonville’s climate, with door hinges and soft-close dampers being the parts that wear out first, usually at the 8- to 12-year mark. Florida humidity shortens the life of any parts made with unsealed particleboard, especially around the sink base and dishwasher opening. Call (904) 643-6243 if you want us to assess whether your cabinets have years left or are at the end of their serviceable life.
Most hinge, glide, and damper failures are repairable with replacement parts that cost far less than a full remodel; cabinet box swelling, countertop seam failure, and delaminated laminate edges usually are not repairable in a way that lasts. We will always tell you which side of that line your kitchen falls on, and the assessment is free. Call (904) 643-6243 to have us look.
A full kitchen remodel typically takes three to six weeks from first demo day to final walk-through, depending on countertop template lead time and whether we are moving plumbing or electrical. A cabinet-only installation is often done in three to five working days. We name the day the dumpster arrives and the day the countertop template is cut in your written scope of work, so there is nothing left to wonder about.
We keep common Mighty Buildings-compatible parts on the truck, including 35mm hinge plates, drawer glides in multiple sizes, door bumpers, and soft-close dampers, which lets us complete many repairs in a single visit. If your part is discontinued, we match it to a named-brand equivalent from KraftMaid, Cambria, or Silestone rather than a no-name substitute. Call (904) 643-6243 and we can tell you over the phone whether your part is one we already carry.
Written by Graham Stein, Owner, Elmstead Remodeling Jacksonville at Elmstead Remodeling Jacksonville, serving Jacksonville and nearby areas.
