Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Jacksonville Owner’s Guide
If you have a Wellborn driveway or paver surface that’s cracking, sinking, or separating in Jacksonville, we can match the material, replace the failed section, and restore the finish. Most paver driveway repairs in Jacksonville run between $700 and $4,500 depending on the failed area, while a full replacement lands in the $7,000 to $18,000 range. The tell-tale sign is usually a paver that’s dropped below the surrounding surface after a hard rain, or an edge that’s starting to creep outward into the lawn.
What we see most often in Jacksonville is paver movement caused by our sandy soil shifting after heavy summer storms, which pulls at the sand bed under the pavers and leaves low spots that collect water. Homeowners usually find it when the car tires dip in a spot that used to sit flush, or when a paver edge catches a shoe. We keep the common Wellborn-compatible paver sizes in stock, so matching a replacement to the existing pattern is straightforward.
Which Wellborn Models This Applies To
Wellborn is known for cabinetry, but the Wellborn name also appears on a line of concrete pavers and driveway block sold through regional building suppliers, and that’s the product families in Jacksonville bring us questions about. The pavers come in three common thicknesses: 60mm for pedestrian patios, 80mm for residential driveways, and 100mm for heavier vehicle traffic or commercial aprons. Before you call, measure the thickness of a broken or lifted paver, because that single number tells us whether what’s on your driveway is rated for the load it’s carrying.
Here’s the compatibility gotcha most people don’t discover until they try to match it themselves: Wellborn pavers are manufactured in casting cycles, and color between batches will vary slightly even under the same style name. A paver bought from a big-box store today may sit noticeably lighter or darker next to paver installed three years ago. We pull from matched lots and, where a perfect match isn’t possible, we feather the replacement pavers with a few existing ones so the transition isn’t a hard line across your driveway. For most Wellborn-style pavers, a quality aftermarket equivalent in the same thickness and dimension will sit flush and hold up just as well, but if the exact color match matters to you, we’ll source the OEM lot rather than guess.
Styles & brands we work with
Signs Your Wellborn Driveway & Pavers Are Failing
- Low spots that hold water after rain. This means the sand bed under the pavers has washed out, usually through an edge or a failed joint. Left alone, the low spot spreads as water pools and erodes more sand with every storm.
- Pavers rocking or shifting underfoot. The interlock between pavers has failed, which means the base isn’t holding them tight. It may be a single loose paver or a whole field that’s starting to move.
- Edge pavers creeping into the lawn. Without a proper edge restraint, pavers at the border walk outward under vehicle load. This is common on Jacksonville driveways where the edging was a thin plastic strip that warped in the heat.
- Cracks running through multiple pavers in a line. This usually points to a base failure under the surface, not a bad paver. Water got under, the base shifted, and the pavers cracked when the support dropped away.
- Weeds or sand spilling out from between joints. Joint sand is the locking material between pavers. When it’s gone, pavers start shifting independently and the pattern breaks down, inviting more water and more movement.
One thing we’ve learned working on driveways across Jacksonville’s Avondale, Riverside, and San Marco neighborhoods: when paver edges start moving, the problem is rarely the paver itself. It’s what’s underneath it.
Replacement Cost & What’s Included
For a partial paver replacement or reset in Jacksonville, expect to pay $700 to $4,500 installed, including removing the failed pavers, repairing the base, relaying the pavers, and re-sanding the joints. A full paver driveway replacement runs $7,000 to $18,000 depending on square footage, access for equipment, and whether we’re hauling away the old base or reusing what’s still sound. We always write material and labor as separate line items, named by product and stage, so there’s no allowance line that quietly grows once the crew arrives.
Every repair includes a written price before we start, drop cloths on any path we walk through your home or garage, and a photo of the finished clean-up before we leave. The 365-Day Done Right Promise stays with the job: if the repaired section settles or misbehaves after it’s done, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check the joints around your Wellborn pavers by running a screwdriver along the gaps and seeing whether sand is missing or the sides are wobbling. What we don’t recommend is pulling up and relaying a driveway area yourself, especially if multiple pavers are cracked or the edge is failing. Improper base compaction in Florida’s sandy soil means the repair fails within the next wet season, and you end up redoing the work after you’ve already spent a weekend on it.
If the issue is a single broken paver and the area around it is still tight, a careful hand with a paver replacement is reasonable, but if you’re looking at settling, moving edges, or water pooling, call us at (904) 643-6243 for a free estimate. As Graham Stein puts it, name the material, name the day, name the price – then there is nothing left to wonder about.
FAQs
A properly installed Wellborn paver driveway in Jacksonville should last 20 to 30 years, but the sand bed and base need attention roughly every 8 to 12 years as our heat and rain cycles work the joints loose. Call (904) 643-6243 if you’re seeing sand wash out, and we’ll tell you whether it’s a joint re-sand or a deeper base repair.
A single cracked paver can be lifted and swapped for a matched replacement, but if multiple pavers in a line are cracked, it’s almost always a base problem, not a material problem, and the fix requires lifting the section and rebuilding underneath. We’ll tell you which situation you have during the free estimate, no work sold you don’t need.
Most partial paver repairs take one day, including base compaction, relaying, and joint sand, with a return visit about two weeks later to top up the joint sand after it settles. A full driveway replacement typically runs three to five days depending on weather and access – call (904) 643-6243 for a schedule based on your specific driveway.
We stock the common 60mm and 80mm Wellborn-compatible paver sizes in our most-requested Jacksonville colors, and we order OEM-matched lots for larger sections where color consistency matters. If you have the original supplier’s lot number, that helps us match it faster when you call.
Get Your Wellborn Driveway & Pavers Fixed in Jacksonville
If your Wellborn driveway or pavers are failing, we’ll inspect the surface, name the exact repair, and give you a written price before any work starts. We also stock and install parts and materials for KraftMaid, Cambria, and Silestone projects when families need matched pieces for other areas of the home. Call (904) 643-6243 to schedule a free estimate, or ask for Graham Stein and we’ll have the crew come walk the driveway with you.
Written by Graham Stein, Owner, Elmstead Remodeling Jacksonville at Elmstead Remodeling Jacksonville, serving Jacksonville and nearby areas.
