Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The Jacksonville Owner’s Guide
If you own a Wellborn kitchen and something has failed, a hinge, a drawer glide, a cabinet box that has pulled away from the wall, or a finish that is lifting at the seams, we can match the part and install it. A full Wellborn kitchen remodel in Jacksonville typically runs $14,000 to $45,000 installed, depending on cabinet count, layout changes, and countertop work. Most homeowners discover the problem the hard way: a drawer that suddenly binds in July humidity, a door that will not stay closed, or a shelf bracket that snaps clean through after years of holding cast-iron cookware.
Graham Stein and the Elmstead Remodeling Jacksonville crew stock common Wellborn hinge and glide replacements on the truck. For cabinet boxes, face frames, or finish-matched panels, we order OEM or exact-match aftermarket parts from our supplier network and schedule the swap the same week parts arrive. We are an independent remodeling contractor in Jacksonville, not affiliated with Wellborn, which means we can be direct about what your cabinet line can and cannot accept.
Which Wellborn Models This Applies To
Wellborn builds across several cabinet lines, and the part that fits one line does not always fit another. The three you will see most often in Jacksonville homes are Wellborn Select (entry line, frameless-style options, good for rentals and flips), Wellborn Premier (mid-line, more door profiles and finish choices), and Wellborn Estate (full-custom, inset or framed construction, heavier door weights). Estate doors often carry a thicker, offset hinge pattern that does not interchange with Premier or Select hardware. That is the first compatibility gotcha we see on service calls: a homeowner orders a Premier hinge online, and it will not seat in an Estate door.
The fastest way to identify what you have is the label inside the sink base cabinet or on the back of a drawer box. It lists the cabinet series and the factory date. If the label is gone, measure the hinge cup diameter and the screw spacing, and note whether the door is inset or overlay. We do this on every estimate so the replacement is matched the first time. For OEM versus aftermarket on Wellborn specifically: hinges and glides from the original hardware supplier (Salice, Blum, Grass, depending on build year) are usually the same part Wellborn installed at the factory, and buying them as aftermarket is often cheaper with zero difference in fit. For finish-matched doors, panels, or trim, go OEM, because Wellborn finish codes and aging are nearly impossible to match from a third party.
Styles & brands we work with
Signs Your Wellborn Kitchen Remodeling Is Failing
- A drawer glides rough, then jams, then drops on one side. Florida humidity swells the wood drawer box and the nylon rollers wear faster than they do in dry climates. If you catch it at the rough-glide stage, we can often replace the glide and keep the box. If the box has dropped repeatedly, the corner joinery may have cracked, and the drawer needs a rebuild or replacement.
- A cabinet door sags and will not close flush, and tightening the screw does not fix it. The hinge has worn past its adjustment range, or the screw hole in the face frame has stripped. A stripped screw hole is a five-minute fix with a wood dowel, but a worn hinge needs replacing, not adjusting.
- The cabinet finish is lifting, hazing, or peeling at the bottom edge near the dishwasher. This is the classic Jacksonville failure: repeated steam and heat from the dishwasher breaks down the clear coat and lets moisture into the underlying finish. If it is caught early, a finish touch-up can work. If the MDF core has swelled, the door is done.
- A cabinet box is pulling away from the wall or the corner joint is separating. This is usually an installation issue or water damage, not a hardware issue. We open the wall, inspect the framing, and refasten the box properly. Leaving it means the countertop above it is now carrying weight it was not meant to carry.
- Shelves bow or the shelf clips keep popping out of the pin holes. Adjustable shelf pins in older Wellborn boxes can wallow out the pin holes if the shelves were overloaded for years. We drill and sleeve the holes, or install a fixed cleat if the cabinet is a workhorse.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Jacksonville, a full Wellborn kitchen remodel runs $14,000 to $45,000, and that range is driven by three things: how many cabinets you are replacing, whether the layout changes, and what countertop material goes back in. A cabinet-only replacement in an existing layout with no wall moves, no plumbing changes, and no new flooring starts at the low end. A full gut with new cabinet layout, Cambria or Silestone countertops, a Kohler or Moen sink and faucet, and a Schluter waterproof tile backsplash lands at the high end.
Here is how the line items break down in Jacksonville:
- Cabinet installation: $4,000 – $13,000
- Full kitchen remodel: $14,000 – $45,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
Every project gets a written price before any work starts. Every line item is named: the part, the labor stage, the finish. No allowances that quietly grow. The 365-Day Done Right Promise covers the completed work, which means if a hinge binds or a drawer glide fails after we leave, we make it right.
DIY or Call Us?
For hinges and drawer glides, a careful homeowner can usually diagnose the problem, and if you are comfortable with a drill and a level, swapping a standard overlay hinge is reasonable. The danger with Wellborn cabinets is not high-tension springs or electrical, it is geometry: a door hung slightly out of plane will rub, bind, and wear the new hinge in months. The finish-matching work is where DIY goes wrong most often. We have had homeowners try to touch up a Wellborn finish with a off-the-shelf stain pen and end up with a door that is three shades off and a repair that now costs more than a replacement door would have.
If you want the part identified, matched, and installed so the door hangs right and the finish reads true, call us. We will come look, tell you what it is, and hand you a written price before you owe us anything. Call (904) 643-6243.
FAQs
Wellborn cabinet boxes and face frames that are kept dry and installed correctly typically last 25 to 40 years in Jacksonville, while hinges and drawer glides usually need replacement once every 10 to 15 years in our humidity. The finish life depends heavily on kitchen ventilation and dishwasher placement.
A stripped screw hole can be repaired with a glued dowel, but a worn hinge or glide cannot be repaired, only replaced. If the hinge has lost its spring tension or the glide rollers are flattened, the part is done and the fix is a new one.
A standard hinge or glide swap takes under an hour per cabinet once the right part is on hand. A door or drawer front replacement, including finish matching, typically takes one to two weeks to order and a half day to install.
We carry common Wellborn-compatible hinges, glides, shelf pins, and touch-up kits on the truck. Finish-matched doors, panels, and trim are ordered to spec and usually arrive within one to two weeks. Call (904) 643-6243 and we will check what we have before you schedule anything.
If your Wellborn kitchen is failing in Jacksonville, we will name the material, name the day, and name the price before any work starts, then leave the house with drop cloths up, floors swept, and a photo of the clean-up on your phone. Call (904) 643-6243 to schedule a free estimate.
Written by Graham Stein, Owner, Elmstead Remodeling Jacksonville at Elmstead Remodeling Jacksonville, serving Jacksonville and nearby areas.
