Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does New Window Installation Cost in Jacksonville?
New window installation in Jacksonville, FL typically costs between $450 and $1,200 per window for standard double-hung vinyl units, with most homeowners spending $6,000 to $18,000 total for a whole-house project of 10 to 15 windows. For impact-rated windows required in many Jacksonville coastal and flood-zone neighborhoods, expect to pay $800 to $2,500 per window installed. These 2026 prices reflect both the window unit itself and the labor to remove the old window, set the new one, seal it properly against Florida humidity and wind-driven rain, and haul away the debris.
We know that staring at a $400-per-window quote and a $1,800-per-window quote on the same kitchen window is confusing. That gap is real, and it comes down to what kind of window you are buying, what is behind the wall once the old frame comes out, and whether you are in a neighborhood that requires impact glass. Let’s walk through the numbers line by line so the written price we give you makes sense before the first shoe cover goes on.
If you are planning a larger remodel that includes windows, you may also want to review our home page for a broader look at how Elmstead Remodeling Jacksonville approaches projects from the first walkthrough to the final photo of the clean-up. And for a deeper look at how we handle full window projects specifically, see New Window Installation in Jacksonville.
New Window Installation Cost Breakdown (2026)
Here is what the numbers actually look like across the Jacksonville market this year. These ranges come from real project quotes in neighborhoods from Riverside to Mandarin to Bartram Park, and they hold steady for 2026.
| Line Item | Typical Jacksonville Price Range | What You Are Paying For |
|---|---|---|
| Standard vinyl double-hung window (per window, installed) | $450 – $850 | The window unit, removal of the old frame, setting, flashing, exterior trim, and interior clean-up |
| Mid-grade vinyl window with low-E glass (per window, installed) | $600 – $1,100 | Better energy ratings for Florida heat, low-E coating, better seals |
| Impact-rated window (per window, installed) | $800 – $2,500 | Laminated impact glass, reinforced frame, required in many Jacksonville coastal and flood-zone streets |
| Wood or wood-clad window (per window, installed) | $900 – $2,200 | Historic district compatibility in places like Avondale and Springfield; more material cost and more labor to set properly |
| Whole-house installation (10 – 15 windows, vinyl) | $6,000 – $18,000 | Volume pricing on windows, but more labor days and more flashing, sealant, and trim work |
| Whole-house installation (10 – 15 windows, impact-rated) | $10,000 – $32,000 | Impact glass commands a premium, especially for larger openings like sliding doors and picture windows |
| Window replacement (full-frame tear-out, per window) | $550 – $1,300 | Removing the old frame to the studs, rebuilding the opening, new trim inside and out |
| Window replacement (insert/retrofit, per window) | $400 – $900 | New window set inside the existing frame; less invasive but not always possible if the old frame has rot or water damage |
Those line items should give you a working picture. A single bedroom window in a 1990s stucco house in Mandarin will land near the bottom of the range. A large living-room picture window with impact glass in a 1920s bungalow in Riverside will land near the top, because the sill is likely rotted from a century of Jacksonville humidity and the opening will need to be rebuilt before the new window can be set. That is not a surprise fee. It is a line item we show you in the written price before the work starts.
What Affects New Window Installation Pricing in Jacksonville
The same size window can vary by $1,500 across two houses on the same street. Here are the six factors that actually move the number.
- Impact glass requirements. If you live east of US-1, near the Intracoastal, or in any of the barrier island communities like Atlantic Beach or Neptune Beach, your window openings almost certainly need impact-rated glass to meet Florida Building Code. Impact windows are built with laminated glass and a reinforced frame. That is a real materials upgrade, and it accounts for most of the price difference between a $500 window and a $1,500 window.
- Frame material. Vinyl is the workhorse in Jacksonville, and it is also the most affordable. Wood and wood-clad windows cost more, and they also cost more to install correctly in our climate. A wood window in a humid Jacksonville summer expands and contracts. If it is not flashed and sealed with that movement in mind, the frame will bind or the sash will stick within two or three years. The labor premium is not arbitrary; it is the difference between a crew that has set a hundred wood windows near the St. Johns River and a crew that has set vinyl in a dry climate.
- The condition of the rough opening. In older Jacksonville neighborhoods like Springfield, Murray Hill, and parts of San Marco, the original window frames are often original to the house. Once we pull the old sash out, we sometimes find the sill plate has been quietly rotting for years. That means new framing, new flashing, and sometimes new sheathing before the window can go in. It is not a surprise buried in the quote. It is a line item we identify during the walkthrough, and if we cannot see behind the wall until the old window is out, we stop and walk you through the cost before we touch the framing.
- Window size and shape. Standard openings are flat-priced in most supply chains. Arched, circular, oversized, or custom-shaped windows cost more to manufacture and they take more time to set and trim. A large fixed picture window in a living room overlooking the river is not the same job as a 24-by-36 double-hung in a hallway.
- Interior and exterior trim. Full-frame replacements involve new trim inside and out, and that trim has to match the rest of the house. If you want the new window to look like it has always been there, the trim detail matters. That is a finish-carpentry line item, and it is not where you want a crew cutting corners.
- Permitting and inspection fees. Jacksonville requires permits for window replacement, and the fee schedule is based on the valuation of the work. The costs are not dramatic, usually a few hundred dollars across a whole-house project, but they are part of the written price we give you. We pull the permit, schedule the inspection, and stand behind the work when it passes. You should never pay a “permit handling fee” on top of the actual permit cost without being told about it up front.
How to Save on New Window Installation
There is a difference between saving money and cutting corners, and that distinction matters in a city with Jacksonville’s heat, humidity, and hurricane season. Here is where you can genuinely save without giving up a window that will last.
Replace in phases, but plan the whole house at once. If the budget does not support all fifteen windows in one year, replace the worst-facing windows first. West-facing windows in Jacksonville take the most afternoon heat, and they are usually where the seals fail first. East-facing windows near the Intracoastal take the most wind-driven rain. We can give you a written price for the whole house and a phased schedule that spreads the work across 18 or 24 months without re-mobilizing a crew twice on the same window.
Standardize the window sizes. If you are replacing a set of mismatched windows with odd shapes and sizes, having a conversation about standardizing the openings can save real money. The savings is not in the glass; it is in the labor. A standard double-hung goes in cleanly and quickly. A custom oval out of square takes twice as long. If the aesthetic allows it, standardizing is the single biggest labor savings in a whole-house window project.
Do not skip the flashing and sealant. This sounds odd in a list about saving money, but the most expensive window project is the one that has to be redone in five years because water found its way behind the frame. In Jacksonville, wind-driven rain during summer storms will find every weakness in a window installation. Good flashing tape, properly lapped, with a continuous bead of sealant, is a couple hundred dollars across a whole house. The alternative is a $3,000 repair when the drywall starts staining below a window. Paying a little more now so you do not pay a lot later is the whole point of a written price and a crew that takes the time to do it right.
Ask for a free estimate. You should never have to guess whether a window project fits your budget. Call (904) 643-6243 and we’ll give you a written price before any work starts. There is no charge for the estimate, and the price we write down is the price we honor.
FAQs – New Window Installation Cost
How much does it cost to install a new window in Jacksonville?
A standard vinyl double-hung window installed in Jacksonville costs $450 to $850 for the window and the full installation. Impact-rated windows run $800 to $2,500 per window depending on size. Call (904) 643-6243 for an exact written quote on your specific openings.
Is it cheaper to repair a window or replace it?
If the glass is cracked but the frame and seal are intact, a glass replacement typically runs $150 to $400 in Jacksonville. If the frame is rotting, the seals have failed, or the window is original to a pre-1980 house, replacement is usually the better financial move at $450 to $850 per window. A window with a failed seal is losing energy efficiency every month it stays in the wall.
Do I need impact windows in Jacksonville?
If your home is in a high-velocity hurricane zone east of US-1 or near the Intracoastal, yes, impact-rated windows are required by the Florida Building Code. The cost difference is real, usually $800 to $2,500 per window versus $450 to $850 for standard vinyl. We can confirm what your specific address requires during the free estimate.
How long does new window installation take?
A single window installation typically takes 1 to 2 hours for a standard replacement. A whole-house project of 10 to 15 windows usually takes 2 to 4 days, depending on the condition of the rough openings and how much trim work is involved. We schedule around your family’s sleep hours where possible, and we leave the house clean at the end of every day.
Can you install windows the same week I call?
In most cases, yes. Once we finalize the written price and order the windows, standard vinyl units are usually available for installation within 5 to 10 business days. Impact-rated windows can take 3 to 6 weeks because they are manufactured to order. Call (904) 643-6243 and we can confirm lead times for your specific window sizes before you commit to anything.
Does window installation include clean-up?
Yes, and it is not an add-on. The Cedarwell Care Promise covers every Elmstead Remodeling Jacksonville project: shoe covers at the door, drop cloths on the floors, and a photo of the clean-up before the crew leaves. That photo is your proof, on every job. The old windows, the broken glass, the old trim, and the debris are hauled away at the end of the project.
Why Families in Jacksonville Choose Elmstead Remodeling for Window Installation
We are a Cedarwell company, founded in 2005, and we have spent twenty years doing one thing: remodeling homes for families with children and pets who want the house left in better shape than the crew found it. That shows up in the details. The drop cloths go down before the first window comes out. The quiet tools come out during nap hours and school hours when possible. The crew asks before we move anything off a windowsill or out of a room. And the written price you get before the work starts is the price on the final invoice.
Every project carries the 365-Day Done Right Promise. If the window is not right after the job is complete, we make it right. That is not a marketing line. It is stamped on every project because it is the longest-standing post-project commitment in our service area, and we have held to it since Graham Stein started leading the Jacksonville team.
You will also know exactly who is walking through your door. Every technician is background-checked and uniformed. The phone is answered by a live person, 24 hours a day, not a voicemail box. And the materials we use come from brands you can research by name, whose warranties travel with the finished project: James Hardie for exteriors, GAF for roofing, and window products we will specify line-by-line in your written estimate.
If you are weighing window installation against a broader remodel, we also handle New Window Installation in Jacksonville as a standalone service and as part of whole-home projects. Either way, the process starts the same way: a phone call, a walkthrough, and a written price with real numbers before any work begins.
Written by Graham Stein, Owner at Elmstead Remodeling Jacksonville, serving Jacksonville families since 2005.
Pricing reflects the Jacksonville market as of 2026. Elmstead Remodeling Jacksonville offers free estimates – call (904) 643-6243.
What Our Customers Say
"Two bathrooms done at once with kids and a dog in the house. They kept dust contained, were gentle with the pets, and left the place clean each day. Calm and careful."
- Paige Lindholm"Kitchen and living room refresh. What stood out was the respect for our home, shoes off, floors covered, cleanup every evening. They checked with us before any change. Beautiful result."
- Dontae Willis"They opened up our kitchen and controlled the dust better than I thought possible. Floors protected, a photo of the cleaned space each day. Gentle on the house and on budget."
- Yasmin Croft
