Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Paver Driveway Installation Cost in Jacksonville?
Paver driveway installation in Jacksonville, FL typically costs between $7,000 and $18,000 for a standard two-car residential driveway, with the average project landing around $11,500. Most Jacksonville homeowners pay $12 to $25 per square foot for materials and labor combined. We give every customer a written price before work starts, so you’ll know the full cost before a single paver is set.
Paver Driveway Installation Cost Breakdown (2026)
Here is a clear line-item breakdown based on what we see across Jacksonville neighborhoods, from Riverside to Mandarin to Jacksonville Beach.
Typical Cost by Project Component
| Component | Price Range | Notes |
|———–|————-|——-|
| Existing driveway removal | $1,200 – $3,500 | Concrete or asphalt demolition, haul-away, and base prep |
| Base material (crushed concrete / limestone) | $1,500 – $3,000 | 6 – 8 inches compacted for Jacksonville’s sandy soils |
| Pavers (materials only) | $3,500 – $8,000 | Depends on paver type, thickness, and edging |
| Labor and installation | $1,500 – $4,000 | Includes cutting, setting, compaction, and joint sand |
| Sealing (optional) | $400 – $1,200 | Reapply every 3 – 5 years |
| Edging and drainage | $500 – $1,500 | Critical for Jacksonville’s summer rain patterns |
Total Typical Range: $7,000 – $18,000
A 500-square-foot driveway with standard concrete pavers will sit at the lower end. A 900-plus-square-foot driveway with a paver border, a walkway, and upgraded pavers from a brand like Belgard or Unilock will push toward the top of the range.
What moves the price up? Removing a thick old concrete slab, longer paver runs that require more cuts, a driveway with a slope needing retaining walls, and premium paver styles like tumbled or textured stone. What moves it down? Straight angles, flat terrain, and standard 60mm concrete pavers.
What Affects Paver Driveway Installation Pricing in Jacksonville
Several factors specific to this city change the number on the written quote. Here is what we take into account when pricing a paver driveway in Jacksonville:
- Driveway square footage. This is the single biggest cost driver. A compact one-car driveway in Murray Hill runs 300 – 400 square feet. A sprawling driveway in Nocatee could be 1,000 square feet or more. More area means more base material, more pavers, and more labor.
- Jacksonville’s sandy soil composition. Much of this city sits on sandy, quick-draining soil. That is good news for drainage but means base preparation matters more than it would on clay. We compact 6 – 8 inches of crushed material under pavers so they do not shift after heavy summer rains. Skipping this step saves money up front and costs thousands later.
- The existing driveway condition. If you are replacing an old concrete slab, removal is a separate cost. If you are paving over bare ground or gravel, you skip removal but may need extra base work. In Arlington, where many homes date to the 1950s and 1960s, old slabs can be thick and stubborn.
- Paver type and thickness. Standard concrete pavers cost less than natural stone or clay brick. For a driveway, we recommend pavers rated for vehicle traffic, usually 60mm thick or more. Thinner pavers are meant for patios and will crack under the weight of a pickup truck.
- Drainage and grading. Jacksonville gets roughly 50 inches of rain per year, often in short, intense downpours. A driveway that slopes toward the house needs additional drainage work: a French drain, channel drain, or regrading. Homes on the St. Johns River in San Marco and Ortega frequently require this because the land naturally runs toward the water.
- Access to the site. Tight side yards, gates, fencing, or a driveway behind the house off an alley make material delivery and wheelbarrow runs harder. Crews in Riverside and Avondale often cannot access back driveways with a truck, so everything moves by hand. That adds labor hours.
Paver Driveway vs. Other Jacksonville Driveway Options
Paver is not the cheapest driveway option in Jacksonville, but it is one of the longest-lasting and easiest to repair. Here is how it compares to the alternatives on a typical 500-square-foot driveway:
- Paver driveway: $7,000 – $18,000. Individual pavers are replaceable. No saw-cutting required for repairs. Holds up well to heat and shifts slightly with soil without cracking.
- Concrete driveway: $4,500 – $12,000. Lower upfront cost, but one crack means saw-cutting and patch work that rarely matches. Jacksonville’s sandy soil and hot summers cause more slab movement here than in other climates.
- Asphalt driveway: $3,500 – $9,000. Cheapest up front, but heat softens asphalt. Jacksonville summers regularly hit 95 degrees, which shortens asphalt lifespan. Expect resealing more often than a paver driveway.
For most families in this city, the paver option costs more today and needs less from you over the next 20 years. We will walk through all three with you before you decide. Our only goal is that you choose something that works for the life you actually live, not the one a contractor imagines.
How to Get an Accurate Paver Driveway Quote in Jacksonville
Written prices matter more here than almost anywhere. Because paver driveways involve so many variables, the city has plenty of contractors who give a low verbal estimate and then come back later with change orders. We do not operate that way.
When you call Elmstead Remodeling Jacksonville at (904) 643-6243, a live person answers, 24/7. We schedule a site visit, take measurements, check the soil, look at drainage, and discuss paver options with you. Then you receive a written price before any work starts. That price includes materials, labor, removal, hauling, base prep, and clean-up. If anything changes during the job, you hear about it before it changes and approve it before another dollar is spent.
What to ask any contractor before signing:
- Does the quote include old driveway removal and haul-away?
- How many inches of compacted base does the price include?
- Are the pavers rated for vehicle traffic?
- Does the quote include sealing or is that separate?
- Will the crew use shoe covers and drop cloths inside the house if they need access?
- Is the final price written and fixed before work begins?
The last question matters most. If a contractor will not put the price in writing, walk away.
What Goes Into a Paver Driveway Installation Timeline
A standard two-car paver driveway in Jacksonville takes 3 to 6 working days from removal to final joint sand. Here is what those days look like:
- Day 1: Remove existing driveway, haul away debris, excavate to correct depth, grade for drainage.
- Day 2: Install and compact base material. This step takes longer than most homeowners expect, and that is a good thing. Proper compaction is what keeps your pavers from sinking after the first big rain.
- Days 3 – 4: Set edge restraints, lay pavers, cut and fit borders. This is where the crew spends the most time on detail work.
- Day 5: Compact pavers, sweep joint sand, seal if requested, clean up the site.
Rain stretches the timeline. Jacksonville’s summer pattern of daily afternoon thunderstorms means crews sometimes lose an afternoon. When that happens, we communicate the same day, not after the fact.
How to Save on Paver Driveway Installation
The biggest savings come from the decisions you make before the quote, not from negotiating the price down.
- Consider a standard paver size. Oversized pavers and intricate patterns like herringbone require more cuts and more labor. A simple running bond pattern costs less and looks clean for decades.
- Bundle the project. If you are planning a paver patio anyway, doing the driveway and patio at the same time means one mobilization, one removal haul, and often a better per-square-foot labor rate.
- Choose concrete pavers over natural stone. The look is similar from 10 feet away. The cost difference on a 500-square-foot driveway can be $3,000 or more.
- Do the sealing yourself later. Sealing is a separate line item and is the easiest part of the job to defer. If you are comfortable rolling sealant, you can save $400 – $1,200 by handling it after the driveway is installed.
- Ask about off-season timing. Spring and fall are the busiest paver seasons in Jacksonville. If you can wait for a January or February start, some contractors adjust pricing. We offer free estimates year-round, so it costs nothing to ask what your project would total in a slower month.
For an exact number on your specific driveway, call (904) 643-6243. Our estimates are free, written, and do not change after the work starts.
FAQs – Paver Driveway Installation Cost
How much does a paver driveway cost per square foot in Jacksonville?
Paver driveway installation in Jacksonville runs $12 to $25 per square foot all-in, including materials, labor, base prep, removal of the old driveway, and clean-up. At the lower end are standard 60mm concrete pavers on flat ground with easy access. At the upper end are premium pavers, slopes requiring grading work, and tight sites where materials move by hand. Call (904) 643-6243 for a free, written estimate on your specific driveway.
Is a paver driveway more expensive than concrete in Jacksonville?
Yes. A paver driveway ranges from $7,000 to $18,000, while a poured concrete driveway runs $4,500 to $12,000 for a similar size. Pavers cost more up front but are individually replaceable, which makes repairs cheaper and less visible over time. If cost is the deciding factor, concrete wins. If you want the driveway to look the same in 15 years, pavers earn their price difference.
How long does a paver driveway last in Jacksonville’s climate?
A properly installed paver driveway lasts 25 to 30 years or more in Jacksonville. The pavers themselves often outlast the house. What usually needs attention is the base, especially on sandy soil where poor original compaction shows up as dips and shifting after five to ten years. Choose a contractor who compacts 6 – 8 inches of crushed base and the driveway will settle minimally.
Do paver driveways need sealing in Jacksonville?
Sealing is optional but recommended in Jacksonville. The Florida sun fades paver color faster than in northern climates, and sealing slows that fading and makes driveway stains from oil and tire marks easier to clean. Expect to pay $400 to $1,200 to seal a typical driveway initially and reapply every 3 to 5 years. It is a separate line item on our written quotes, not a surprise add-on.
Can you replace only part of a paver driveway?
Yes. That is the primary advantage of pavers over concrete or asphalt. When a section shifts or sinks, we remove the affected pavers, add and re-compact base material, and reset the same pavers. The repair takes a day or two and costs far less than saw-cutting concrete. No patch, no color mismatch, no permanent seam. If your driveway has a low spot, call (904) 643-6243 and we will tell you whether a spot repair or full reset makes more sense.
If You Are Still Reading, Here Is What We Would Tell You In Person
You are not hiring a paver company. You are hiring the people who will be at your house for a week, walking past your front door, using your driveway, and leaving the job site the way they found it or better.
Every Elmstead Remodeling Jacksonville crew member is background-checked and uniformed, so you always know who is at the door. Shoe covers go on before anyone steps inside, and drop cloths go down before any equipment crosses a floor. We keep tools quiet during nap hours and school hours when we can. If there is a product choice with a pet-safe alternative, we choose it. When the crew leaves on the final day, you get a photo of the clean-up, taken before the truck pulls away. That is standard, not an extra. Every project carries the 365-Day Done Right Promise: if it is not done right, we make it right. That promise is stamped on your written price. It is the longest-standing post-project commitment in our service area.
The materials we install come from brands you can research by name: pavers from Belgard and Unilock, edging and drainage products from names like NDS. Their warranties travel with the finished driveway, and you should verify them independently. We want you to.
And we answer the phone. A live person, 24/7, no voicemail maze and no waiting until Monday. When you call (904) 643-6243, someone picks up.
Your driveway is the first thing your kids see when they come home and the last thing you cross before locking the door. It should be built by someone who remembered that.
For a free, written paver driveway estimate in Jacksonville, call (904) 643-6243 today.
We are proud to serve Jacksonville, Jacksonville Beach, Atlantic Beach, Neptune Beach, Ponte Vedra, Mandarin, Riverside, Avondale, San Marco, Ortega, Arlington, Murray Hill, Springfield, Nocatee, Orange Park, and Fernandina Beach. See our Paver Driveway Installation in Jacksonville page or return home to explore other remodeling services.
Written by Graham Stein, Owner at Elmstead Remodeling Jacksonville, serving Jacksonville since 2005. Pricing reflects the Jacksonville market as of 2026. Elmstead Remodeling Jacksonville offers free estimates – call (904) 643-6243.
What Our Customers Say
"Two bathrooms done at once with kids and a dog in the house. They kept dust contained, were gentle with the pets, and left the place clean each day. Calm and careful."
- Paige Lindholm"Kitchen and living room refresh. What stood out was the respect for our home, shoes off, floors covered, cleanup every evening. They checked with us before any change. Beautiful result."
- Dontae Willis"They opened up our kitchen and controlled the dust better than I thought possible. Floors protected, a photo of the cleaned space each day. Gentle on the house and on budget."
- Yasmin Croft
